Stainless Steel Wire Mesh Square Opening Anping Oriental Wire Mesh Co. is the major manufacturer of stainless steel wire mesh of China, especially known for its best quality and excellent reputation. Stainless steel wire mesh square opening is in contrast with stainless steel wire mesh Dutch woven.
Varieties of Stainless Steel Wire Mesh Square Opening:
Stainless Steel Square Wire Mesh produced by Anping Oriental Wire Mesh Co. is classified into two types according to weaving patterns:
Stainless steel square wire mesh plain woven
Stainless steel square wire mesh twill woven
Stainless Steel Wire Mesh Plain weave is the most commonly used weave. Each warp wire crosses alternately above and below each weft wire. Warp and weft wires generally have the same diameter.
Twill Weave Stainless Steel Wire Mesh is made by each weft wire passing alternately over two, and then under two successive warp wires and each warp wire passing alternately over two and under two successive weft wires. It is possible to be used to allow a heavier than standard wire diameter.
Stainless Steel Square Wire Mesh Varieties according to materials:
Stainless steel square wire mesh type 304
Stainless steel square wire mesh type 304L
Stainless steel square wire mesh type 316
Stainless steel square wire mesh type 316L
Type 304 is often referred to as "18-8" ( 18% chromium, 8% nickel ) with the basic stainless alloy mostly commonly, utilized for wire cloth weaving. It withstands outdoor exposure without rusting and resists oxidation at an elevated temperature up to 1400 Degrees Fahrenheit. Type 304 L is very similar to T-304, the difference being the reduced carbon content for better weaving and secondary welding characteristics. Type 316 Stabilized by the addition of 2% molydbenum, T-316 is an "18-8" alloy. It has better resistance to pitting corrosion than the other chromium-nickel stainless steels where brines, sulphur-bearing water or halogen salts, such as chlorides are present. A valuable property of T-316 is high creep strength at elevated temperatures. Other mechanical properties and fabricating characteristics are similar to T-304. Type 316 L is very similar to T-316, the difference being the reduced carbon content for wire cloth weaving and secondary welding characteristics.
Stainless Steel Square Wire Mesh Uses: Stainless steel wire mesh and stainless steel wire cloth products are widely used in petroleum, chemical industry, environment protection, mine, airspace, paper-making,electronic, metallurgy etc. Special size and specification are available according to customers requirement.
Stainless Steel Square Wire Mesh Sizes:
Standard roll width of stainless steel square wire mesh: 1m or 48"
Standard roll length of stainless steel square wire mesh: 30m or 100'
|Specification List of Stainless Steel Wire Mesh
||Aperture in mm
|3mesh x 3mesh
|4mesh x 4mesh
|5mesh x 5mesh
|6mesh x 6mesh
|8mesh x 8mesh
|10mesh x 10mesh
|20mesh x 20mesh
|30mesh x 30mesh
|40mesh x 40mesh
|50mesh x 50mesh
|60mesh x 60mesh
|80mesh x 80mesh
|100mesh x 100mesh
|120mesh x 120mesh
|150mesh x 150mesh
|160mesh x 160mesh
|180mesh x 180mesh
|200mesh x 200mesh
|250mesh x 250mesh
|280mesh x 280mesh
|300mesh x 300mesh
|350mesh x 350mesh
|400mesh x 400mesh
|Roll width: 2'-8'